This is default featured slide 1 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 2 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 3 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 4 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 5 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

Friday, September 30, 2022

Supercritical Co2 Extraction Is Super Critical to Manufacturing High Quality Nutraceuticals

When a gas similar to carbon dioxide is contained below high pressure along with heat, there are transformed into its objective properties.  It develops into a supercritical fluid (SCF).  Under these conditions, the gas possesses the solvating power of a liquid as well as the diffusivity of a gas.  Its thickness is similar to the thickness of a liquid and its extremely low surface tension is the quality of gas.  In short, it has properties of together a gas plus a liquid.  For this cause, supercritical fluids work tremendously well as a processing medium for a broad variety of substance, biological, plus polymer matrices.

An influential ability of supercritical fluid extraction (SFE) is the skill to exact control which component(s) of a multifaceted medium is extracted and which ones are gone behind. This is proficient through accurate control of quite a few key parameters counting temperature, force, flow speed, and processing time.  It is probable to “tune” the fluid to take out those components of notice while leaving others at last.  Additional compensation of SCFs is elevated extraction the business is expected to see grave growth in North America, and Europe, with the APAC principally due to aging populations and a changing fondness towards normal medicine. Yields and greater product transparency. 

Decomposition of resources roughly never occurs due to the moderately kind processing temperatures. Carbon dioxide, which is the main commonly use SCF, has a critical temperature of 31°C along with critical pressure of 73 atmospheres


Nutraceuticals merge the ‘nutrients’ derived from usual food sources along with the health-promoting inference of ‘pharmaceutics’. Nutraceuticals maintain a broad range of physiological paybacks depending on the chemical structure of their sources, counting boosting immune fitness, constant pain supervision, and improving in general wellness. Nutraceuticals are well-liked among consumers who have a preference for normal products and dealing to conventional pharmaceuticals

Nutraceuticals are confidential another way in each country. Even surrounded by one control, they may be referred to as nutritional supplements, useful foods, therapeutic foods, and pharmaceuticals. Although there are slight differences among these categories they are normally worn interchangeably. Nutraceuticals can moreover be categorized in further ways besides these slight variations in nomenclature. Since 2010, classification has come out to discriminate among nutraceuticals that either have or have not undergone medical trials and productively demonstrated useful healthiness properties.

Enhanced alarm for the superiority and security of food products, increased partiality for natural products, plus stricter regulations on the left over level of solvents, all supply to the increasing use of subcritical c02 extraction machine as a main alternative for the removal, fractionation, and separation of lively ingredients.  As a solvent-free procedure, supercritical fluid expertise is a accepted answer for the useful foods and nutraceutical division, one of the best ever growing customer obsessed markets. Recent advancement in the expertise and increased consumption of the procedure demand a complete, single-source review of present and prospect trends in supercritical fluid expertise.

Compiling charity from international specialist in the ground, Supercritical Fluid Extraction of Nutraceuticals there the situation of the science in the withdrawal along with fractionation of bioactive component by supercritical fluids. Focusing on executed industrial course and trends, it appraisal the basics of the technology and look at the finances of supercritical fluid extraction structure and processes.

To know more check on Thar process

 

Thursday, September 15, 2022

Supercritical Fluid Chromatography: An Overview

Introduction

Chromatography is a necessary group of techniques for the taking apart of the compound of mixtures by their incessant distribution connecting two phases i.e. motionless stage and movable phase plus the organization is connected with the subsequent:

1. Solid motionless phases as well as a liquid (or) gaseous movable phase are named adsorption chromatography.

2. Example: Gas chromatography (GC).

3. A liquid motionless phase and a liquid (or) gaseous movable phase are named divider chromatography.

4. Example: Paper chromatography.

Advances in knowledge have resulted in a broad range of techniques unstable in difficulty, separation capability; sympathy of adsorption along with divider chromatography provides a brilliant parting and allows the correct examination of extremely short concentrations of a broad selection of substance in multifaceted mixtures.



Supercritical fluid chromatography (SFC) is a cross method of gas as well as liquid chromatography as when the mobile phase is gas and the motionless phase is liquid this method is called liquid chromatography. When the movable phase is liquid with the motionless phase gas, then the system is called the GC. So SFC combines the top features together with liquid chromatography along with GC.

 SFC is a significant method because it permits the division and purpose of a group of compounds that are not expediently handled moreover by GC (or) liquid chromatography.

The thickness of a supercritical fluid is sealed to that of a liquid, and such a fluid is an extremely successful solvent. However, the stickiness of a supercritical fluid is secure to that of a gas, and the diffusion coefficient of material in a Supercritical fluid extraction is in middle among that in a liquid and in gas.

In universal, supercritical fluids display properties that are middle between those of liquids as well as gases, and these properties are very much influenced by heat and pressure. As a consequence, supercritical fluids are used in a diversity of applications such as movable phases in chromatography, taking away agents, and chemical reaction solvents.

SFC is careful as a precious option over HPLC for the reason that the movable phase property is different considerably. A supercritical fluid has properties transitional connecting those of a liquid as well as a gas. The temperature, as well as pressure of a constituent in its supercritical condition, should be superior to the critical values, Tc as well as Pc, in that order. 

When a constituent is in its supercritical state, it cannot be liquefied by raising the pressure. Supercritical carbon dioxide (CO2) is most usually used in SFC, classically since it is disgraceful, gamely on hand, and environmentally gracious. Moreover, it is very secure to be used in the food trade since it is effortlessly removed from samples by effortless growth and vanishing.

Supercritical fluid chromatography (SFC) uses extremely compacted gas on top of its critical temperature and pressure in the place of a natural solvent as the solvent phase. The SFC detect systems are those usually used in GC. The main benefit of SFC is the detecting method usually used in GC, that is, FID, and the stipend in the examination for thermal unsteady compounds.

Gases such as carbon dioxide, nitrous oxide, as well as ammonia are usually used. Organic solvents such as methanol, isopropanol, methylene chloride, tetrahydrofuran, along with acetonitrile are regularly in use in HPLC as modifiers to add to solvent strength.

You can know more about this on Thar process.


Tuesday, August 2, 2022

Why is Supercritical Fluid Extraction More Effective than Solvent Extraction and Distillation

SCFE is most commonly used to extract supercritical carbon dioxide as a process fluid (sCO2). SCFE's capacity to extract the necessary chemicals in their purest form while simultaneously improving the process's efficiency, economy, and safety is the primary reason for its expanding popularity.

For thousands of years, traditional medicines, foods, and cosmetics have all been made with natural components. Plants are the most commonly used natural resource for medical purposes in folklore. Traditional folk medicines, such as ginseng roots, ginger rhizomes, and ginseng fruit, have all been widely used to relieve pain, reduce nausea, improve mood, and enhance cognitive function.


Using extraction techniques influenced by the idea that a natural product could be used as a weapon or a functional food to prevent or treat a variety of illnesses like cancer, neurological disorders, diabetes, bacterial infections, and cardiovascular diseases, modern drugs like penicillin and galantamine were discovered and produced today.
Numerous substances, such as carotenoids, -tocopherol, -humerene, -tocopheryl acetate and numerous oils, have been demonstrated to be beneficial to human health. There are numerous secondary metabolites found in plant-derived products, such as the terpenoids, alkaloids, and phenolic compounds mentioned above.

An SCFE Solvent that is Supercritical Fluid Extraction?

Carbon dioxide and water are the two most commonly used supercritical fluids. As a supercritical fluid, sCO2 has the following advantages:

At 31.10C, it has a low critical pressure of 73.9 bar, is non-flammable and non-toxic, and its density can be adjusted to increase its solvent power. It's also readily available in large quantities and pure form, all of which make it an attractive choice for use in a variety of compounds that are sensitive to temperature.


When CO2 is collected from the atmosphere and recycled, the SCFE process that employs CO2 becomes environmentally benign.
Solvent for SCFE in CO2: Carbon Dioxide (CO2) Extraction of Supercritical Fluids When extracting a component from a raw material, organic solvents are utilised to do it. Later, the organic solvent is separated from the dissolved component. This is a problem since organic solvents don't completely separate from the material, resulting in residues.
A variety of techniques are available for obtaining components of interest, which are commonly mixed with inactive components before further separation to disclose the molecules. In addition to simple methanol-based extraction methods, there are also Soxhlet and steam distillation methods that are considered traditional approaches.
However, these extraction methods have a number of drawbacks, such as the necessity for additional operations to remove toxic processing solvents and the destruction of heat-labile compounds in many circumstances. While some of the methods can provide a high yield of a certain spectrum of compounds depending on the solvent used, others of these methods are extremely selective for a small number of compound types.
When comparing the effectiveness of various processes, the Soxhlet method is the most used method of lipid extraction. As a result, these extraction technologies are not only notoriously unsuccessful since they yield so little bioactive extract in proportion to the large energy input, but they also pose a significant environmental concern because so much organic waste must be disposed of.

Thursday, July 28, 2022

Extraction of Bioactive Compounds from Supercritical Carbon Dioxide

The application of supercritical fluid extraction system (SFE) on the recovery of key bioactive compounds from plant matrices provides many advantages over typical organic solvent extraction procedures, notably in terms of environmental issues. Due to its cleanliness and environmental friendliness, SFE has grown in favor as a "green" processing technology in recent years. It is simpler to collect extracts offline and relate SFE to other analytical methods such as gas chromatography, HPLC, and online supercritical fluid chromatography when SFE is performed with pure or modified CO2. Increasing emphasis is being paid to supercritical carbon dioxide (SC-CO2) in the search for ecologically friendly solvents that may be used in a variety of applications. Supercritical fluid carbon dioxide is nontoxic, inexpensive, combustible, and non-polluting, making it an ideal solvent for extracting natural resources. When compared to more conventional methods like steam distillation and Soxhlet, SC-CO2 extraction offers a rapid, simple, and cost-effective solution. When it comes to employing SFE technology, there are a number of challenges that need to be solved. Traditional extraction methods have also been compared to SFE. SFE procedures may be made more efficient with the aid of this paper's practical guide.



Different enterprises, notably the food and pharmaceutical industries, employ large amounts of solvents to isolate various important bioactive compounds. The recent decade has seen a lot of attention paid to environmentally friendly, efficient, and sustainable extraction methods. Supercritical CO2 extraction (SC-CO2), ultrasound aided extraction (UAE), and microwave assisted extraction (MAE) are three non-traditional approaches that might provide considerable improvements (MAE). "Green Chemistry" has emerged in recent years, drawing attention to environmentally-friendly processes [1]. This necessitates the development of a more efficient extraction process. about 300 plant species were studied using the Supercritical Fluid Extraction (SFE) method in the past 17 years (from 2000 to 2017). SFE research focuses mostly on plant material [2,3]. Many of these plants' beneficial, pure components are already being employed to benefit human health and nutrition [4]. Due to CO2's great flexibility, non-explosive, non-flammable, non-toxic, and cost-effective properties, it is the most often used supercritical solvent [5]. Separation from solutes is also straightforward. The low critical temperature of CO2 makes it a solvent. Thermally unstable compounds may be degraded using low-critical temperature solvents rather than standard liquid solvents. These solvents are particularly popular in the pharmaceutical and natural goods industries. Simple extraction from the extract is an advantage of using low-critical temperature solvents. Supercritical carbon dioxide (SC-CO2), which is a hybrid of a liquid and a gas, offers many advantages over traditional liquid solvents. Figure 1 shows CO2's pressure-temperature phase diagram. A pressure-temperature phase diagram depicts the temperature and pressure requirements for CO2 in various stages. The fluid is referred to be supercritical if it is over the critical temperature and pressure. Carbon dioxide has a melting point of 31.1°C and a pressure of 73 atm. An infinite isothermal compressibility produces a very rapid change in density with temperature and pressure when the fluid is near to its critical point This fluid's dissolving capability may be precisely manipulated by varying the temperature and/or pressure of the supercritical fluid. Because of this, various fractions may be extracted from natural sources by adjusting the temperature and pressure of the extraction process.

Extraction of bioactive components from natural sources has seen an increase in the utilization of supercritical fluids, in particular CO2, due to recent advances in the technique's key advantages. The sfc purification is often utilized for the extraction of bioactive compounds because of its "health and safety" and environmental qualities, as well as the rising concern about the presence of organic solvent residues in items meant for human consumption. The solvating properties of supercritical fluid, which are achieved by applying pressure and temperature greater than the fluid's critical point, are the basis for the supercritical fluid extraction method.

Wednesday, July 20, 2022

Safe and Effective CO2 Extraction Methods

Supercritical CO2 extraction is a method that uses high pressure and temperature to force carbon dioxide into a different phase. Changing the temperature and pressure of a reaction with CO2 makes it possible to get a large variety of different products. When plant matter undergoes a phase transition, the relative abundances of its constituent parts may become unstable.

CO2 is Quick, Safe, and Clean.

The removal of CO2 has a positive economic impact. It allows the production of oil that is free from contaminants, easy to refine, and beneficial to the environment. Due to the solvent being stuck in the oil, procedures that employ toxic solvents may take a long time to complete. In a wide variety of applications, CO2 has shown to be the most effective commercial process gas.

CO2 allows you to "tune" the extraction process, which is especially useful when used with a device that will separate components during the extraction. Different working modes allow you to zero in on certain compounds, such as terpenes (terpenoids) and THC/CBD (cannabinoids). CO2 has many uses beyond only cleaning and preserving food, and it can even generate food- and medical-grade oils in the correct system and climate. 

The CO2 extraction technique is clean, safe, and very flexible, making it a viable option for extracting a wide variety of plant materials, including hops, kava kava, essential oils, and more.

Assessing the Productivity of the Extracting Method

When comparing the efficiency of different extraction methods, the overall yield is not very relevant.

It is common practice to collect yield information for the purposes of building financial models, calculating return on investment, etc. However, the results of any extraction process are subject to the quality of the input. Each strain of cannabis has its own unique cannabinoid profile, on top of the distinctions between Indica and Sativa. Most plants are grown for the express purpose of producing either a high quantity of THC or a high quantity of CBD, however, hybrids do exist. The amount of THC recovered as a percentage of the amount of THC in the feedstock is the most reliable measure of extraction yield.


Is There Any Advantage to Using Supercritical CO2 for Removal?

The "gold standard" in cannabis extraction procedures is supercritical CO2 extraction as it is safer, more effective, and cleaner than other extraction methods. For instance, heavy metal residues may be left behind during butane extraction. An evaluation found that cannabinoids, waxes, and rosins extracted using supercritical carbon dioxide were the purest possible. Although carbon dioxide (CO2) is a greenhouse gas that contributes to global warming, its removal from the natural environment, use in an extraction process, and subsequent return to the atmosphere do not lead to an increase in greenhouse gas emissions.

Another advantage of supercritical CO2extraction is that it allows for the separation of individual compounds. The food processing industries of such nations often include large-scale commercial facilities using a supercritical CO2 extraction. Coffee is decaffeinated using supercritical CO2 extraction equipment, which is an interesting bit of trivia to learn.

Full Variety Extracts: What Are They?

Full spectrum extracts deliver a more full flavor and effect experience. These extracts, which demand significantly more complex technology and talent to generate, will continue to be highly valuable. To determine the effectiveness and chemical equilibrium of full-spectrum extracts, it is necessary to compare the THC, cannabinoid, and terpene profiles of the feedstock and the extract. You can also check out, Thar Process.

Cannabis plants are made up of a complicated blend of compounds, and it is these chemicals that decide the outcome, taste, and scent of the flowers. The whole spectrum of cannabinoids, terpenes, and other chemicals make up cannabis flowers. Many extractors don't have the organic chemistry training needed to fully understand the intricate processes involved in making a top-notch extract. This leads them to keep making mistakes while trying to improve and purify their extracts. A THC extract that is 95% pure suggests that almost all of the plant's therapeutic characteristics were lost in the extraction procedure. Some could compare breathing an extract with up to 95% pure THC to the difference between eating manufactured food and drinking freshly squeezed fruit juice.

Wednesday, June 29, 2022

Subcritical VS Supercritical water (H2O)

Boilers are closed containers used to heat a fluid, often water. However, not all liquids will boil in this device, despite its name. Multiple uses are found for the heated fluid, including those of cooking, space heating, and water heating. Both Supercritical fluid and supercritical boilers fall within the category of steam production systems. A subcritical boiler heats water at a pressure below the fluid's critical point, whereas a supercritical boiler heats water above the fluid's critical point.

What is it, exactly, that must be taken into account?

At its critical temperature and pressure, a material exhibits properties of both a gas and a liquid, and the two phases are almost indistinguishable from one another. This is because both the gas and liquid phases have reached equilibrium densities. If the pressure and temperature are high enough, certain substances may remain liquid even after they have passed their critical point, and these are known as supercritical fluids. Subcritical fluids are materials that evaporate at temperatures below their critical point. To put it another way, the critical point of a phase equilibrium curve is the point where the curve is at its most acute.


What is the definition of a subcritical boiler, exactly?

Subcritical boilers are those that can withstand pressures of 3,208 psi and temperatures of up to 374 °C (the critical point of water). These boilers form the backbone of a system with a fixed evaporation termination point. A steam generator in the shape of a drum is a popular example of a subcritical boiler.

The boiler's fluid is heated and flows naturally thanks to the risers. It is a mixture of water and steam that has been separated in the drum and is now escaping via this riser. By entering the super-heater chamber as steam, water is cycled back to the evaporator intake.

If the fluid is allowed to flow freely, the usable pressure range is about 190 bar in the drum at most. However, if a circulating pump is used for circulation, this potential expansion is possible (also known as forced circulation). This lengthening is due to the set point at which evaporation in the drum stops. Also, it is used to calculate the surface area of the superheater and evaporator. It is a major drawback of subcritical boilers because bubbles may form in them. Know more about the Thar Process.

What Are Supercritical Boilers?

To generate supercritical steam, a special kind of boiler called a supercritical boiler is used. This kind of boiler is often utilized in power plants. In a supercritical boiler, liquid water instantly becomes steam, and no bubbles are produced.

Supercritical boilers function at pressures more than 3,200 psi and temperatures between 538 and 565 °C. In a supercritical boiler, the last stage of evaporation is controlled by a variable-endpoint mechanism. They don't use drums in these boilers. This means that the evaporator may be used once to evaporate the whole batch. As a result of the feed pump, water (or another fluid) begins to flow. This means the system may be employed in subcritical or supercritical conditions, depending on the pressure setting. Because of this, the evaporation endpoint moves. The evaporator and super-heater zones also automatically adjust to environmental conditions.

This boiler is considered a supercritical boiler since it runs at pressures more than 221 bar over the critical pressure of water. Outside of its critical point, water behaves similarly to other fluids because of its similarity to steam.

When the latent heat of vaporization of water is zero, there is no longer any difference between the liquid and vapor phases. One of the major advantages of supercritical boilers is the reduced amount of fuel they need. This results in reduced emissions of greenhouse gases. Not only would water savings be possible due to a reduction in bubble generation, but there might also be environmental benefits.

Can you describe the similarities between subcritical and supercritical boilers?

The basic cycle and process by which subcritical and supercritical boilers function are identical.

Except for the absence of drums in the evaporators, the architecture of supercritical boilers is otherwise standard.

There is little difference between the equipment and methods used by the Subcritical Boiler and the Supercritical Boiler. Examples include turbines, condensers, economizers, and feed pumps for boilers.

Thursday, June 23, 2022

How Do You Measure and Control a Supercritical Fluid's Flow?

A supercritical fluid is a substance that has not yet reached the pressure required to compress it into a solid state but is above its critical point when the liquid and gas phases no longer exist in the Supercritical Fluid Extraction. To avoid the mass transfer limitations that delay the flow of liquid through porous surfaces, it may effuse through them like a gas. SCF can dissolve liquids and solids much more effectively than gases can. Around the critical point, little changes in temperature or pressure induce considerable changes in density, making it possible to "fine-tune" many characteristics of a supercritical fluid.

Supercritical fluids are found in the atmospheres of Jupiter, Saturn, Venus, Earth, and maybe Uranus and Neptune. Water from black smokers, a kind of hydrothermal vent found deep in the ocean, is an example of the supercritical water that may exist here on Earth. They are used as an alternative to organic solvents in a wide range of commercial and scientific processes. Carbon dioxide and water are the most often used supercritical fluids, and they are typically put to use in power generation and decaffeination processes, respectively. It's fascinating that certain compounds may dissolve in the supercritical state of a solvent while being intractable in the gaseous or liquid phases. It is possible to extract material, move it in solution to its destination, and then deposit it by allowing or inducing a phase shift in the solvent.



Supercritical fluid chromatography (SFC) is often employed in place of gas chromatography (GC) and liquid chromatography (LC) when a separation requires the separation of a non-volatile or thermally labile species. Supercritical mobile phases (often CO2) have viscosities and solute diffusivities that are intermediate between those of gases and liquids. It is possible to create supercritical CO2 by subjecting a gas to very high pressures. In order to transform high-pressure UV flow cells into infrared-transparent solid-phase catalysis (SFC) flow cells, the quartz windows are replaced. Similar to how GC-IR is conducted, SFC-IR may be carried out utilizing light pipe flow cells. When taking spectra using a flow cell SFC-IR, spots where CO2 absorbs heavily will appear black in both cases. The effectiveness of SFC-IR techniques for eliminating the mobile phase may be attributed to the low vaporization temperature of supercritical CO2. SFC-IR mobile phase elimination may be accomplished using the same techniques as LC-IR mobile phase elimination. Matrix isolation SFC-IR may be carried out using the same apparatus as GC-IR, except CCl4 can be used in place of argon as the matrix material. To prevent CO2 condensation during matrix isolation SFC-IR, the surface temperature of the deposition matrix must be maintained at 150 K.

SFC has been proved to be a suitable alternative to normal phase chiral HPLC due to its much higher speed, safety, comparably wide use, and significant solvent cost savings. The semi prep dry-down time and cost may be drastically reduced when working with small fraction sizes. With the mobile phase being non-combustible, many jobs that were previously contracted out may now be done in a regular laboratory.

The pharmaceutical business using Thar Process has been a major driver of SFC's expansion. However, the technology's potential and use are still lost on many researchers. Surprisingly, most chiral separations and purifications are still performed using very expensive, volatile organic solvents, which are both damaging to the environment and cause lengthy, inefficient separations with much larger fractions. Some speculate that SFC's lack of significant expansion into these and similar businesses is due to the lack of specialized academic training in the field. SFC has traditionally had a higher barrier to admission than HPLC, which is why it is seldom seen at educational institutions. Another possible contributor is the hitherto poor sensitivity of analytical-scale SFC, which has prevented it from being used for validated trace analysis. In other words, we are free of these restrictions at last. SFC seems to solve many of the issues with HPLC and to satisfy many of the future separation requirements, therefore it has a promising future

Wednesday, April 20, 2022

Manufacturing High-Quality Nutraceuticals Necessitate Supercritical Co2 Extraction

Supercritical CO2 is carbon dioxide that has been compressed and heated beyond its critical point (31.1 oC, 1081 psi). There are many advantages to using this fluid, including minimal cost and no residual solvents, but these are only a few of them. The carbon dioxide used in supercritical CO2 activities is simply diverted from other large-scale industrial processes using extraction or separation equipment. Supercritical CO2 is used in a range of green chemical processes because of its minimal environmental effect.

As a solvent for industrial processes, supercritical CO2 has become a popular choice due to its low cost, as well as its nontoxicity and lack of volatile properties.

For these reasons, supercritical CO2 is recognized as "GRAS" (Generally Recognized as Safe), which is a necessary classification for industrial applications.


What are some of the advantages and disadvantages of using Supercritical fluid extraction?

In comparison to other common solvents, carbon dioxide has the advantage of not being flammable or dangerous. The disadvantage of this solvent is that it requires a great deal more pressure than hydrocarbon solvents. As an example, a high-quality supercritical CO2 extraction machine will operate at a pressure of 3800 psi or more. Pressures as high as 15000 psi are possible using high-pressure equipment. It takes a significant amount of engineering and expensive equipment to achieve and manage such high pressures. For a fraction of the price of hydrocarbon solvents, and without the need of operating in a hazardous environment, the solvent may be used.

For extractions and separations, supercritical CO2 offers several benefits in terms of 'tunability' since it can be fine-tuned by making incremental temperature and/or pressure adjustments. This allows the solvent's behavior to be very selective when utilized. Due to the comparatively high working pressures of Supercritical CO2, several 'unwanted' extraction/separation results may occur. As an example, in botanical extractions, Supercritical CO2 eliminates a large number of unwanted fats and lipids from plant materials.

In order to determine if you should employ supercritical or subcritical methods, what are some of the most basic approaches?

To describe a state of matter in which it is below the critical point, it is called "sub-critical." Carbon dioxide may exist in a variety of forms, including gas, liquid, and solid. For extractions, liquid phase carbon dioxide is a popular choice since it can be used at lower temperatures. Liquid carbon dioxide has a lesser solubility than supercritical carbon dioxide, which has a higher solubility. The only way to know for sure whether supercritical or subcritical CO2 is better is to conduct experiments and gather data. We provide our clients process development services in exchange for a charge.

Nutraceutical ingredients

For extraction, purification, recrystallization, and fractionation, supercritical fluids are preferred. This technology is used to process hundreds of millions of pounds of coffee, tea, and hops each year. Supercritical CO2 extraction is becoming more popular in the herbal and botanical extracts, vitamins, and supplements sectors since it is linked with the highest purity and quality. 

The rising scrutiny of organic solvents and the demand for improved nutraceuticals and natural commodities have driven the study of alternate and better extraction processes. Astaxanthin from microalgae, paclitaxel from yew needles, and lycopene from tomato peels are some of the active compounds that may be concentrated using supercritical CO2. By fractionating EPA/DHA from fish oils and algae, nutraceutical companies may provide their client's optimal fat ratios. In addition to boosting product concentration and yield, a more efficient extraction process removes solvent residues, which is very important.

In comparison to traditional solvent methods, Supercritical fluid extraction is a more efficient method. High purity and concentrations of the product may be achieved using supercritical fluids. Furthermore, there are no organic solvent residues in either the extract or the waste biomass. For best product stability and quality, extraction is most effective at low working temperatures—less than 50 degrees Celsius, for example.

Creating plant-based nutraceuticals necessitates the use of a supercritical process for three reasons.

No leftover solvents, thus it's pure.

Value-added product made with minimum extraction times, better yields, and reduced maintenance/energy consumption for cost-effectiveness via mechanical innovation

Supercritical CO2 extraction is a non-toxic alternative to traditional extraction methods, resulting in cleaner and healthier end products that may be consumed by humans.

Thursday, April 14, 2022

Supercritical Fluid Extraction of Natural Bioactive Compounds from Natural Plant Materials: Recent Advances

In this blog post, you will read about recent advances in greener technology for extracting natural bioactive components from plant origin sources. Bioactive compounds of plant origin are natural compounds present in small amounts in plants. Due to its human health benefits and characteristics of being eco-friendly, researchers have shown great interest in extracting bioactive compounds. Nowadays, many extraction techniques and conventional extraction methods have developed. However, no extraction technique has been obtainable as a benchmark for extracting natural bioactive compounds from plants. 

Productivity, as well as selectivity of modern and traditional extraction methods, depends on selecting the critical input parameters. These parameters include plant-based samples, the structure of bioactive compounds, and good scientific skills. This blog intends to discuss the recent advances in supercritical fluid extraction methods, especially supercritical CO2. In addition to the supercritical fluid extraction technique, there is the use of fundamental principles for extracting bioactive compounds from natural materials like spices, herbs, aromatic and medicinal plants. 

 


Extraction is one of the most suitable methods used to separate components from plant-based materials. These days, many extraction techniques are used at the laboratory, pilot, and commercial scales by many researchers in order to extract the different target compounds present in plants. 

While talking about bioactive compounds, these are natural secondary metabolites extracted from many plants parts. These plant parts are leaves, stems, roots, seeds, flowers, and fruits by using many extraction procedures. The demand for these compounds is increasing day by day and this is because they are professed as natural and safe for applications in many industries such as food, feed, agriculture, and pharmaceuticals. In addition to this, bioactive compounds have been found to possess a wide spectrum of health-promoting characteristics for animals and humans such as antibacterial, anti-inflammation, anti-aging, and anti-cancer effects.   

 

The extraction method of steam distillation, hydro-distillation, and pressing methods are used to isolate essential oils, fatty acids, phenolic acids, and carotenoids. But these extraction methods have some limitations such as: 

Ø  Time-consuming

Ø  Losing some volatile compounds 

Ø  The possibility of leaving toxic solvent residue in the extract

Ø  Low yield & low extraction efficiency 

As a result, in recent years, green chemistry was developed for extraction purposes in order to reduce energy and solvent consumption and replace conventional solvents with eco-friendly substitutes.

Modern techniques to extract and isolate bioactive compounds from plant-based materials are gaining more and more popularity in the research and development field. Let us take some examples of extraction methods such as ultrasound-assisted extraction, pressurized liquid extraction, and fluid extraction at presently accessible and environmentally sustainable technologies. 

In simple words, greener technology is an extraction method based on the detection and development of extraction processes, which will reduce energy consumption and enables the use of solvent substitutes.  

In closing

From this whole content journey, it can be right to say supercritical fluid extraction is an isolation technique commonly employed to extract the natural bio-active compound from plants due to the unique properties of supercritical fluids. Supercritical carbon dioxide behaves like a liquid and like a gas simultaneously. Hopefully, the information shared through this post regarding supercritical fluids will help you a lot. Thank you for reaching out!

 

Tuesday, March 1, 2022

Co2 Extraction Process Co-Solvent Types

While talking about co-solvent, it can be divided into two categories. The first type is miscible solvent on another side the smaller content is considered as an entertainer. The separation of heavy oils often uses two or more two C3 ~ C3 light hydrocarbon mixtures. Moreover, the interaction between the solvents makes the mixing solvent are far better than a single solvent. The second category of co-solvent is to add subcritical organic solvent in order to obtain pure supercritical fluids. Additionally, they may form a single-phase miscible mixed fluid, and it depends upon the amount of mixing and dragged by the supercritical fluid. Through this content journey, you may easily understand supercritical fluid extraction and the CO2 extraction process. 

 



Two ways:

In supercritical gases, co-solvent can affect the solubility as well as selectivity in two ways:


First way: Solvent Density


Second Way: Interaction between trainer and interaction molecules.


In simple words, the mixing of the little amount of entrained gives little effect on the density of the solvent gas. Additionally, the defining factors affecting selectivity as solubility in the Van der Waals forces between the molecules of solute and the trainer. Or there is some definite intermolecular between the solute role and the trainer in order to form hydrogen bonds and some other chemical forces as well. In addition to this, the critical point of the mixed solvent will change accordingly after adding the trainer. 

 

On the other side, other solvents are frequently used as co-solvent for carbon-dioxide research. Under moderate pressure and room temperature conditions, they can form a homogeneous miscible state with CO2.


To clear this point, let us take an example of a polar solvent with high solubility parameters. These polar solvents include methanol (CH3OH), ethanol (CH3CH2OH), and acetone (C3H6O) and are used as co-solvent and added to carbon dioxide. Not only the δ value of the mixture fluid is improved but also the continuous turnability of the fluid solubility parameter δ can be maintained. This is because, there is a special molecular force such as Lewis’s acid-base force, hydrogen bonding force, association force. And they are formed between the polar and the polar co-solvent, the selectivity and solubility of the solute enhance.

 

Importance of co-solvent in the CO2 extraction process:

  • It helps to increase the solubility of the separated components in supercritical fluids.

  • It helps to improve the selectivity of the solute when a suitable entertainer that plays a definite role when the solute is added.


Wrapping up

In the end, we can say non-polar carbon dioxide can effectively extract non-polar lipophilic substances of starch derivatives and selectivity as well. Add an appropriate amount of non-polar solvent to utilize co-solvent in order to improve the extraction process of CO2. Hopefully, the information shared through this post regarding supercritical fluid extraction and the role of co-solvent in the extraction process will help you a lot. Furthermore, you can clear your doubts and ask your questions in the below comment section box. To read more blogs and articles about the supercritical extraction process, feel free to visit https://tharprocess.com/. Thank you for reaching out!

Thursday, January 20, 2022

CBD Extraction Methods - Thar Process

The popularity of cannabis plants is increasing day by day as cannabinoid are found in them and is an alternative solution to common ailments. For example, tetrahydrocannabinol (C21H30O2) is another cannabinoid, which is also found in cannabis plants. Moreover, this CBD doesn`t have a psychoactive effect and, when this CBD oil is ingested, only 1/5th part of it is absorbed. The process of CBD must be carried out carefully in order to have CBD oil effective. These days, with the development of technology, there are numerous options available and, most CO2 Extraction Companies like Thar process believe in supercritical CO2 extraction method. This is because this method of extraction is environment friendly, less-expensive, non-toxic, and green product obtain as a yield. Let`s have a look at CBD extraction through this content journey.

Different types of extraction methods:

#1. CO2 Extraction: The king of all extraction methods

Supercritical carbon dioxide is used as a solvent in the CO2 extraction method to pull phytochemicals from cannabis plants. Supercritical CO2 possesses the properties of liquid as well as gas and, the critical temperature and pressure of supercritical carbon dioxide are 31 degrees Celsius and 73 bar respectively. This state of solvent is perfect for extraction this fluid can easily move through materials like gas and dissolve materials like a liquid.  



#2. Solvent extraction:

In this extraction method, a hydrocarbon such as ethanol (CH3CH2OH) works as a solvent to remove extracts from cannabis plants trimming. And this typically looks like this:

  • First of all, CH3CH2OH (Ethanol) is added to trimming and mixed for minutes and after that, allow ethanol to dissolve extracts from the plant materials. 

  • After that, ethanol is strained from the materials. 

  • At the end of this extraction process, all the ethanol is evaporated by heating and, only the plant extracts remain.


#3Dry ice or ice water method:

It is clear from the name of this extraction method that dry ice is used as a solvent. But there is a question about dry ice. The carbon dioxide (CO2), which is in solid form is known as dry ice. While the extraction process is carried on, this creates a powdery resin extract often referred to as bubble hash. In this method of extraction, there are many variations and, they follow these below steps:

  • Dry ice is mixed with finely-chopped plant trimmings and, this step is helping in separating extracts from the plant material. 

  • After that, some water is added to the mixture of trimming and ice, and the final mixture is strained through a mesh bag. 

  • You will see, the extracts settle at the bottom of the strained mixture. You can get the final product in powder form by draining excess water from the top.


Wrapping up

In all extraction methods, temperature control is an important element to obtain a higher yield in CBD extraction. Moreover, the temperatures have positive as well as negative impacts as the excess temperature can damage CBD and, lower temperatures can`t proceed the process. For example, in the CO2 Extraction process, the temperature of CO2 is about 31°C and, if this temperature is varied, it can give a negative impact on the final product. Thanks! 


Wednesday, January 12, 2022

CO2 Extraction of Cannabis Oil: A Guide

The process of CO2 extraction is used to make many food and other products and, these days its popularity is highly in demand as it extracts top quality cannabis oil high in cannabidiol. In the medical cannabis and therapeutic hemp industries, supercritical as well as subcritical extraction is highly used with large commercial operations. Through this content journey, we may come to know about the CO2 extraction for cannabis oil. 

 

Safer, cheaper, and greener solvent:

Cannabis oil uses on a commercial scale either through the use of hydrocarbon solvents such as hexane, butane or via other supercritical or subcritical carbon dioxide processes. The extraction based on carbon dioxide is considered more environmentally friendly. Additionally, this solvent is safer, cleaner, and less toxic than fossil-based extraction.  



What is supercritical CO2?

In simple words, a supercritical carbon dioxide is a pressurized form of CO2 having critical temperature and, critical pressure is 31 °C and 73 bar. This liquid form of carbon dioxide is known as supercritical CO2. Supercritical CO2 extraction enables directing maximum productivities of cannabidiol reliant on the type and quality of cannabis material being used.

 

Supercritical carbon dioxide: cannabis oil extraction

  • First of all, the extraction chamber is filled with ground material, which is known as trim. 

  • After that, a pump forces highly pressurized CO2 at optimum temperature into the extraction chamber.

  • In the extraction chamber, liquid carbon dioxide acts as a solvent and interacts with cannabis. 

  • The highly pressured form of carbon dioxide carries the oil particles of cannabis and, the pressure inside the separator is lower and, the CO2 and cannabis oil separate out. 

  • The liquid carbon dioxide increases and is running scared back to the CO2 tank for recycling in the case of a closed-loop system.

  • The cannabis oil, waxes, and resins incline in the separator where they are seized by a collection container.

  • The resultant material is treated further into numerous products, such as cannabis oil, free of any solvents.

 

Cannabidiol oil yields with supercritical CO2

While talking about yield oil with supercritical carbon dioxide, it produces approx.10% true cannabis oil and, it depends on trim weight. On the other side, if you add in the resin and waxes that are essential for some application and the final product may be from 18 to 25% of the product. 

 

Costs of supercritical CO2 extraction equipment:

The equipment used for the carbon dioxide extraction process is too much expensive. And, it varies from tens of thousands of dollars for small units and thousands of dollars for cutting edge having a capacity of 60 liters.

 

Wrapping up

In the end, we can say Supercritical CO2 extraction is nothing without carbon dioxide, or also can say that supercritical carbon dioxide is the backbone for many extraction industries. Hopefully, the information shared through this informative post will help you a lot regarding the role of highly pressurized CO2 in the extraction process. Thanks!